These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Rating Code
G
Solenoid Energization Code
None
Actuator Type
Solenoid
Spool Code
2
Manual Override Option Code
None
Port T Code
7
Mechanical Options
None
Electrical Options
None
Port Restrictor Plugs
None
Function
3-Position Spring Centered
Housing Code
None
Port T Pressure Rating
3000 psi
Operation
Solenoid Operated
NFPA Size
D03
Response Type
Standard Response
Cycle Rate [Max]
N/A
Electrical Connection
DIN 43650
Crossover
All Ports Blocked
Coil Type
DIN 43650
Overrides
No Overrides
Design No.
60
Spool Spring Arrangement Code
C
Reducer Module
N/A
Voltage & Frequency
12 VDC
Rated Flow [Max]
21 gal/min
Port Restrictor Plug Code
None
Solenoid Code
G
Pilot Valve Type
N/A
Indicator Lights
No
Pressure Port Check Valve Pressure
N/A
Electrical Connector Code
None
Center Position
All Ports Blocked
Pressure [Max]
5075 psi
Pilot/Drain
None
Solenoid Indicator Lights Code
None
EN Code
None
Spool Shift Timing
N/A
Surge Suppressor/Damper
None
Function Code
2
Valve Type
High-Performance
Spool Indicator Switch Code
None
Surge Suppressor/Damper Code
None
Coil Type Code
U
Solenoid
Double
Seal Material
Buna-N
AC/DC
DC
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
