These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
AC/DC
DC
Electrical Options
None
Electrical Connector Code
None
Solenoid Code
H
Reducer Module
N/A
Port T Pressure Rating
3000 psi
Function
2-Position Spring Offset, End to End
Pilot/Drain
None
NFPA Size
D03
Coil Type Code
U
Port Restrictor Plug Code
None
Indicator Lights
No
Surge Suppressor/Damper
None
Solenoid Indicator Lights Code
None
EN Code
None
Operation
Solenoid Operated
Cycle Rate [Max]
N/A
Coil Type
DIN 43650
Solenoid Energization Code
None
Valve Type
High-Performance
Rated Flow [Max]
21 gal/min
Mechanical Options
None
Function Code
2
Design No.
60
Spool Shift Timing
N/A
Surge Suppressor/Damper Code
None
Port Restrictor Plugs
None
Center Position
All Ports Blocked
Pressure Port Check Valve Pressure
N/A
Seal Material
Buna-N
Pressure [Max]
5075 psi
Spool Code
2
Voltage & Frequency
24 VDC
Spool Spring Arrangement Code
AL
Overrides
No Overrides
Housing Code
None
Manual Override Option Code
None
Actuator Type
Solenoid
Port T Code
7
Coil Rating Code
H
Spool Indicator Switch Code
None
Solenoid
Single
Crossover
All Ports Blocked
Pilot Valve Type
N/A
Electrical Connection
DIN 43650
Response Type
Standard Response
Weight
3.519 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
