These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type Code
U
Cycle Rate [Max]
N/A
Solenoid Code
H
Operation
Solenoid Operated
Seal Material
Buna-N
Center Position
All Ports Blocked
Overrides
No Overrides
Valve Type
High-Performance
Port T Code
7
Pilot/Drain
None
Pressure [Max]
5075 psi
Electrical Connector Code
None
Coil Type
DIN 43650
Solenoid Energization Code
None
Response Type
Standard Response
Solenoid
Single
Rated Flow [Max]
21 gal/min
Voltage & Frequency
24 VDC
Housing Code
None
Actuator Type
Solenoid
Function Code
2
Indicator Lights
No
Design No.
60
EN Code
None
Spool Indicator Switch Code
None
Electrical Connection
DIN 43650
NFPA Size
D03
Spool Shift Timing
N/A
Surge Suppressor/Damper Code
None
Port Restrictor Plugs
None
Port T Pressure Rating
3000 psi
Coil Rating Code
H
Spool Code
2
Reducer Module
N/A
Function
2-Position Spring Offset, End to End
Crossover
All Ports Blocked
AC/DC
DC
Electrical Options
None
Spool Spring Arrangement Code
AL
Mechanical Options
None
Pilot Valve Type
N/A
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plug Code
None
Surge Suppressor/Damper
None
Solenoid Indicator Lights Code
None
Manual Override Option Code
None
Weight
3.519 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
