These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
AC/DC
AC
Housing Code
None
Manual Override Option Code
None
Spool Shift Timing
N/A
Solenoid
Double
Reducer Module
N/A
Port Restrictor Plugs
None
Coil Type Code
U
Pressure [Max]
5075 psi
Coil Type
DIN 43650
Indicator Lights
No
Port T Pressure Rating
3000 psi
Coil Rating Code
A
Response Type
Standard Response
Design No.
60
Electrical Connection
DIN 43650
Surge Suppressor/Damper Code
None
Solenoid Energization Code
None
Overrides
No Overrides
Operation
Solenoid Operated
Pilot/Drain
None
Spool Indicator Switch Code
None
Electrical Connector Code
None
Voltage & Frequency
110 VAC – 50 Hz
Seal Material
Buna-N
Rated Flow [Max]
21 gal/min
EN Code
None
Crossover
All Ports Open
Cycle Rate [Max]
N/A
Center Position
All Ports Open
Pressure Port Check Valve Pressure
N/A
Electrical Options
None
Port Restrictor Plug Code
None
Spool Spring Arrangement Code
C
Pilot Valve Type
N/A
Spool Code
0
Actuator Type
Solenoid
Function Code
0
Function
3-Position Spring Centered
Solenoid Code
A
Surge Suppressor/Damper
None
Port T Code
6
NFPA Size
D03
Valve Type
High-Performance
Mechanical Options
None
Solenoid Indicator Lights Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
