These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Mechanical Options
None
Function Code
0
Surge Suppressor/Damper Code
None
Function
3-Position Spring Centered
Reducer Module
N/A
Coil Type
DIN 43650
Electrical Connection
DIN 43650
Cycle Rate [Max]
N/A
Solenoid
Double
Pilot/Drain
None
Crossover
All Ports Open
Spool Code
0
EN Code
None
Center Position
All Ports Open
Port T Pressure Rating
3000 psi
Seal Material
Buna-N
Surge Suppressor/Damper
None
Actuator Type
Solenoid
Spool Shift Timing
N/A
Port Restrictor Plug Code
None
Port T Code
6
Voltage & Frequency
110 VAC – 50 Hz
Coil Type Code
U
Solenoid Indicator Lights Code
None
Pilot Valve Type
N/A
Port Restrictor Plugs
None
Overrides
No Overrides
Housing Code
None
Solenoid Energization Code
None
Valve Type
High-Performance
Pressure Port Check Valve Pressure
N/A
Manual Override Option Code
None
Indicator Lights
No
Response Type
Standard Response
NFPA Size
D03
Pressure [Max]
5075 psi
Spool Spring Arrangement Code
C
Coil Rating Code
A
Design No.
60
Spool Indicator Switch Code
None
Rated Flow [Max]
21 gal/min
Operation
Solenoid Operated
Electrical Connector Code
None
Solenoid Code
A
AC/DC
AC
Electrical Options
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
