These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Function
2-Position Spring Offset, End to Center
EN Code
None
Mechanical Options
None
Overrides
No Overrides
Pressure [Max]
5075 psi
Spool Code
0
Electrical Connector Code
None
Coil Type
DIN 43650
Port Restrictor Plugs
None
Spool Indicator Switch Code
None
Housing Code
None
Pilot Valve Type
N/A
Operation
Solenoid Operated
Center Position
All Ports Open
Port Restrictor Plug Code
None
Rated Flow [Max]
21 gal/min
Cycle Rate [Max]
N/A
Solenoid Energization Code
None
Valve Type
High-Performance
Solenoid
Single
Electrical Connection
DIN 43650
Coil Rating Code
B
Crossover
All Ports Open
Function Code
0
Pilot/Drain
None
Coil Type Code
U
Surge Suppressor/Damper Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Spool Shift Timing
N/A
Port T Code
6
AC/DC
AC
Seal Material
Buna-N
Port T Pressure Rating
3000 psi
Design No.
60
Solenoid Code
B
Reducer Module
N/A
Manual Override Option Code
None
NFPA Size
D03
Electrical Options
None
Response Type
Standard Response
Actuator Type
Solenoid
Solenoid Indicator Lights Code
None
Surge Suppressor/Damper
None
Pressure Port Check Valve Pressure
N/A
Indicator Lights
No
Spool Spring Arrangement Code
B
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
