These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Valve Type
High-Performance
Port Restrictor Plugs
None
Electrical Connection
DIN 43650
Operation
Solenoid Operated
Reducer Module
N/A
Port Restrictor Plug Code
None
Pilot Valve Type
N/A
Port T Pressure Rating
3000 psi
Crossover
All Ports Open
Solenoid Energization Code
None
Center Position
All Ports Open
Function
2-Position Spring Offset, End to Center
Solenoid Code
B
Mechanical Options
None
Pilot/Drain
None
Surge Suppressor/Damper
None
Function Code
0
Coil Rating Code
B
Spool Shift Timing
N/A
AC/DC
AC
Electrical Connector Code
None
Seal Material
Buna-N
Coil Type Code
U
Design No.
60
Spool Spring Arrangement Code
B
Surge Suppressor/Damper Code
None
Spool Indicator Switch Code
None
Port T Code
6
Manual Override Option Code
None
Rated Flow [Max]
21 gal/min
EN Code
None
NFPA Size
D03
Cycle Rate [Max]
N/A
Indicator Lights
No
Housing Code
None
Solenoid Indicator Lights Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Spool Code
0
Pressure Port Check Valve Pressure
N/A
Overrides
No Overrides
Solenoid
Single
Coil Type
DIN 43650
Actuator Type
Solenoid
Electrical Options
None
Response Type
Standard Response
Pressure [Max]
5075 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
