These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid Code
G
Surge Suppressor/Damper Code
None
Port T Code
7
Pilot/Drain
None
Crossover
All Ports Blocked
Overrides
No Overrides
Reducer Module
N/A
Spool Shift Timing
N/A
Electrical Connection
DIN 43650
Actuator Type
Solenoid
Cycle Rate [Max]
N/A
Coil Type
DIN 43650
Electrical Connector Code
None
Solenoid
Single
Coil Type Code
U
Spool Code
2
NFPA Size
D03
Electrical Options
None
Indicator Lights
No
AC/DC
DC
Port Restrictor Plugs
None
Rated Flow [Max]
21 gal/min
Response Type
Standard Response
Pressure Port Check Valve Pressure
N/A
Solenoid Energization Code
None
Spool Indicator Switch Code
None
Valve Type
High-Performance
Seal Material
Buna-N
Mechanical Options
None
Coil Rating Code
G
Voltage & Frequency
12 VDC
Pressure [Max]
5075 psi
Solenoid Indicator Lights Code
None
EN Code
None
Port Restrictor Plug Code
None
Function Code
2
Pilot Valve Type
N/A
Spool Spring Arrangement Code
A
Function
2-Position Spring Offset, End to End
Port T Pressure Rating
3000 psi
Surge Suppressor/Damper
None
Housing Code
None
Operation
Solenoid Operated
Center Position
All Ports Blocked
Design No.
60
Manual Override Option Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
