These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Function
2-Position Spring Offset, End to End
Solenoid Indicator Lights Code
None
Actuator Type
Solenoid
Surge Suppressor/Damper
None
NFPA Size
D03
Operation
Solenoid Operated
Voltage & Frequency
12 VDC
Pressure [Max]
5075 psi
Electrical Connector Code
None
Spool Code
2
Coil Rating Code
G
Housing Code
None
Solenoid Code
G
Mechanical Options
None
Pilot Valve Type
N/A
Coil Type Code
U
Spool Spring Arrangement Code
A
Valve Type
High-Performance
Manual Override Option Code
None
Solenoid Energization Code
None
Coil Type
DIN 43650
Response Type
Standard Response
Pressure Port Check Valve Pressure
N/A
Port T Pressure Rating
3000 psi
Rated Flow [Max]
21 gal/min
Pilot/Drain
None
Crossover
All Ports Blocked
EN Code
None
Port Restrictor Plug Code
None
Solenoid
Single
Port Restrictor Plugs
None
Electrical Connection
DIN 43650
Overrides
No Overrides
Cycle Rate [Max]
N/A
Design No.
60
Electrical Options
None
Port T Code
7
Surge Suppressor/Damper Code
None
Indicator Lights
No
Spool Shift Timing
N/A
AC/DC
DC
Seal Material
Buna-N
Reducer Module
N/A
Center Position
All Ports Blocked
Function Code
2
Spool Indicator Switch Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
