These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Double
Reducer Module
N/A
Voltage & Frequency
110/120 VAC – 50/60 Hz
Overrides
No Overrides
Crossover
All Ports Blocked
Pilot/Drain
None
Manual Override Option Code
None
EN Code
None
Port T Pressure Rating
3000 psi
Seal Material
Buna-N
Design No.
60
Pressure Port Check Valve Pressure
N/A
Center Position
All Ports Blocked
Mechanical Options
None
Pilot Valve Type
N/A
Pressure [Max]
5075 psi
Spool Code
2
Surge Suppressor/Damper Code
None
Function
3-Position Detented
Valve Type
High-Performance
Spool Indicator Switch Code
None
Coil Type
DIN 43650
Response Type
Standard Response
Electrical Connector Code
None
Indicator Lights
No
Rated Flow [Max]
21 gal/min
Port Restrictor Plugs
None
Spool Shift Timing
N/A
Function Code
2
Port Restrictor Plug Code
None
NFPA Size
D03
Electrical Options
None
Operation
Solenoid Operated
Coil Type Code
U
Electrical Connection
DIN 43650
Cycle Rate [Max]
N/A
Solenoid Code
B
Coil Rating Code
B
Housing Code
None
Port T Code
6
Spool Spring Arrangement Code
N
Solenoid Indicator Lights Code
None
Actuator Type
Solenoid
Surge Suppressor/Damper
None
Solenoid Energization Code
None
AC/DC
AC
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
