These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pilot Valve Type
N/A
Pressure [Max]
5075 psi
Port Restrictor Plug Code
None
Overrides
No Overrides
Electrical Connector Code
None
Function
3-Position Detented
Manual Override Option Code
None
Reducer Module
N/A
Seal Material
Buna-N
Housing Code
None
Mechanical Options
None
Pressure Port Check Valve Pressure
N/A
NFPA Size
D03
Electrical Connection
DIN 43650
Pilot/Drain
None
Port Restrictor Plugs
None
Spool Code
2
Spool Shift Timing
N/A
Rated Flow [Max]
21 gal/min
Solenoid Energization Code
None
Crossover
All Ports Blocked
Cycle Rate [Max]
N/A
Electrical Options
None
Coil Rating Code
B
Spool Indicator Switch Code
None
Design No.
60
Surge Suppressor/Damper Code
None
Center Position
All Ports Blocked
Coil Type Code
U
Solenoid Code
B
Solenoid
Double
Voltage & Frequency
110/120 VAC – 50/60 Hz
Coil Type
DIN 43650
Indicator Lights
No
AC/DC
AC
Port T Code
6
Operation
Solenoid Operated
Actuator Type
Solenoid
Solenoid Indicator Lights Code
None
Response Type
Standard Response
Valve Type
High-Performance
Spool Spring Arrangement Code
N
EN Code
None
Surge Suppressor/Damper
None
Function Code
2
Port T Pressure Rating
3000 psi
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
