These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid
Single
Electrical Options
None
Surge Suppressor/Damper
None
Electrical Connection
No Connector
Solenoid Indicator Lights Code
None
Spool Spring Arrangement Code
AL
AC/DC
AC
Seal Material
Buna-N
Voltage & Frequency
110/120 VAC – 50/60 Hz
Actuator Type
Solenoid
Manual Override Option Code
None
Pressure Port Check Valve Pressure
N/A
Spool Indicator Switch Code
None
Housing Code
W
Spool Code
2
Coil Rating Code
B
Function
2-Position Spring Offset, End to End
Indicator Lights
No
Port Restrictor Plugs
None
Port Restrictor Plug Code
None
Mechanical Options
None
Pilot/Drain
None
Rated Flow [Max]
21 gal/min
Coil Type Code
F
Center Position
All Ports Blocked
Spool Shift Timing
N/A
Pressure [Max]
5075 psi
Solenoid Code
B
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Design No.
60
Port T Code
6
Function Code
2
Port T Pressure Rating
3000 psi
Solenoid Energization Code
None
Reducer Module
N/A
Crossover
All Ports Blocked
Electrical Connector Code
None
Response Type
Standard Response
Valve Type
High-Performance
Overrides
No Overrides
NFPA Size
D03
EN Code
None
Pilot Valve Type
N/A
Surge Suppressor/Damper Code
None
Operation
Solenoid Operated
Cycle Rate [Max]
N/A
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back