These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Actuator Type
Solenoid
NFPA Size
D03
Port T Code
6
Surge Suppressor/Damper Code
None
Valve Type
High-Performance
Spool Code
2
Coil Type Code
F
Operation
Solenoid Operated
Port T Pressure Rating
3000 psi
Response Type
Standard Response
Port Restrictor Plug Code
None
Electrical Options
None
Housing Code
W
Pressure [Max]
5075 psi
Manual Override Option Code
None
AC/DC
AC
Overrides
No Overrides
Function
2-Position Spring Offset, End to End
Indicator Lights
No
Crossover
All Ports Blocked
Pressure Port Check Valve Pressure
N/A
Rated Flow [Max]
21 gal/min
Center Position
All Ports Blocked
Pilot/Drain
None
Spool Indicator Switch Code
None
Seal Material
Buna-N
Solenoid Energization Code
None
Solenoid Indicator Lights Code
None
Electrical Connection
No Connector
Mechanical Options
None
Coil Rating Code
B
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Spool Spring Arrangement Code
AL
Function Code
2
Spool Shift Timing
N/A
Surge Suppressor/Damper
None
Solenoid Code
B
Solenoid
Single
Reducer Module
N/A
Design No.
60
Voltage & Frequency
110/120 VAC – 50/60 Hz
Port Restrictor Plugs
None
Pilot Valve Type
N/A
Cycle Rate [Max]
N/A
Electrical Connector Code
None
EN Code
None
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back