These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid Indicator Lights Code
None
Surge Suppressor/Damper Code
None
Surge Suppressor/Damper
None
Electrical Connector Code
None
NFPA Size
D03
Housing Code
None
Spool Code
0
Spool Shift Timing
N/A
Solenoid Code
H
Response Type
Standard Response
AC/DC
DC
Center Position
All Ports Open
Port Restrictor Plugs
None
Pilot Valve Type
N/A
EN Code
None
Valve Type
High-Performance
Port Restrictor Plug Code
None
Overrides
No Overrides
Seal Material
Buna-N
Crossover
All Ports Open
Function
2-Position Spring Offset, End to Center
Rated Flow [Max]
21 gal/min
Solenoid
Single
Solenoid Energization Code
None
Function Code
0
Spool Spring Arrangement Code
B
Mechanical Options
None
Indicator Lights
No
Electrical Connection
DIN 43650
Voltage & Frequency
24 VDC
Operation
Solenoid Operated
Spool Indicator Switch Code
None
Actuator Type
Solenoid
Port T Code
7
Manual Override Option Code
None
Cycle Rate [Max]
N/A
Coil Type Code
U
Port T Pressure Rating
3000 psi
Electrical Options
None
Reducer Module
N/A
Design No.
60
Coil Type
DIN 43650
Pressure [Max]
5075 psi
Pilot/Drain
None
Pressure Port Check Valve Pressure
N/A
Coil Rating Code
H
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
