These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port T Code
7
Indicator Lights
No
Operation
Solenoid Operated
Voltage & Frequency
24 VDC
Pressure [Max]
5075 psi
Function Code
0
Pilot/Drain
None
Port Restrictor Plug Code
None
Housing Code
None
Valve Type
High-Performance
Function
2-Position Spring Offset, End to Center
Port T Pressure Rating
3000 psi
Solenoid Code
H
Manual Override Option Code
None
Response Type
Standard Response
Center Position
All Ports Open
Reducer Module
N/A
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
None
Spool Indicator Switch Code
None
Actuator Type
Solenoid
Crossover
All Ports Open
AC/DC
DC
Solenoid Energization Code
None
Coil Type Code
U
Coil Type
DIN 43650
Design No.
60
NFPA Size
D03
EN Code
None
Solenoid
Single
Pilot Valve Type
N/A
Spool Spring Arrangement Code
B
Electrical Connection
DIN 43650
Cycle Rate [Max]
N/A
Surge Suppressor/Damper Code
None
Overrides
No Overrides
Electrical Options
None
Electrical Connector Code
None
Surge Suppressor/Damper
None
Seal Material
Buna-N
Spool Shift Timing
N/A
Spool Code
0
Port Restrictor Plugs
None
Rated Flow [Max]
21 gal/min
Mechanical Options
None
Coil Rating Code
H
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
