Find a Service Center
- D05 Single Solenoid Operated Valve
- 115 VAC - 60 Hz
- Ground Terminal
- No Coil
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Reducer Module | N/A |
| AC/DC | AC |
| Coil Type | No Coil |
| Voltage & Frequency | 115 VAC – 60 Hz |
| Electrical Options | None |
| NFPA Size | D05 |
| Flow Direction Code | 4 |
| Port Restrictor Plugs | None |
| Rated Flow [Max] | 20 gal/min |
| Electrical Options Code | L |
| Spool Code | 7 |
| Solenoid | Single |
| Function | 2-Position Spring Offset |
| Response Type | Standard Response |
| Pressure Port Check Valve Pressure | N/A |
| Cycle Rate [Max] | N/A |
| Pilot Valve Type | N/A |
| Crossover | P to A or B, T & A or B Blocked |
| Operation | Solenoid Operated |
| Actuator Type | Solenoid |
| Mechanical Options | None |
| Mechanical Options Code | None |
| Design No. | 50 |
| Center Position | P to A & B, T Blocked |
| Pressure [Max] | 3000 psi |
| Coil Rating Code | None |
| Overrides | No Overrides |
| Pilot/Drain | None |
| Seal Material | Buna-N |
| Solenoid Air Gap Code | H |
| Valve Type | Standard-Duty |
| Port T Pressure Rating | 1000 psi |
| Surge Suppressor/Damper | None |
| Spool Spring Arrangement Code | A |
| Indicator Lights | Yes |
| Electrical Connection | Ground Terminal |
| Weight | 10.0 LB |
