Skip to content Skip to navigation menu
This part may be obsolete or discontinued.
There may be limited quantities still available for purchase. Contact us for availability. Please contact your local service center for alternative options.
Vickers by Danfoss595871

595871

DG4S4 Series Solenoid Operated Directional Valve
Item #101979026
  • D05 Single Solenoid Operated Valve
  • 115 VAC - 60 Hz
  • Ground Terminal
  • No Coil
  • 2-Position Spring Offset
  • P to A & B, T Blocked
  • w/Indicator Lights
  • None
  • Design Level 50
+ Show More + Show Less
Vickers by Danfoss595871
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • D05 Single Solenoid Operated Valve
  • 115 VAC - 60 Hz
  • Ground Terminal
  • No Coil
  • 2-Position Spring Offset

description

  • DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
  • Port connections are made by mounting the valve on a manifold or subplate containing the interface.
  • Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

caution

  • It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
  • When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
  • When a drive has three pulleys, at least two should be flanged
  • If the drive has more than three pulleys, every other pulley should be flanged
Voltage & Frequency 115 VAC – 60 Hz
Design No. 50
Seal Material Buna-N
Pilot Valve Type N/A
Port Restrictor Plugs None
Rated Flow [Max] 20 gal/min
Pressure [Max] 3000 psi
Indicator Lights Yes
Electrical Connection Ground Terminal
Overrides No Overrides
Surge Suppressor/Damper None
Flow Direction Code 4
Spool Spring Arrangement Code A
Spool Code 7
AC/DC AC
Center Position P to A & B, T Blocked
NFPA Size D05
Mechanical Options Code None
Coil Rating Code None
Crossover P to A or B, T & A or B Blocked
Cycle Rate [Max] N/A
Pilot/Drain None
Operation Solenoid Operated
Solenoid Air Gap Code H
Actuator Type Solenoid
Valve Type Standard-Duty
Electrical Options None
Function 2-Position Spring Offset
Electrical Options Code L
Pressure Port Check Valve Pressure N/A
Coil Type No Coil
Mechanical Options None
Reducer Module N/A
Solenoid Single
Response Type Standard Response
Port T Pressure Rating 1000 psi
Weight 10.0 LB
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison