Find a Service Center
- D05 Double Solenoid Operated Valve
- 115 VAC - 50 Hz
- Lead Wires w/Terminal Box
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Valve Type | Standard-Duty |
| Mechanical Options Code | None |
| Flow Direction Code | 4 |
| Coil Rating Code | None |
| Operation | Solenoid Operated |
| Pressure Port Check Valve Pressure | N/A |
| Design No. | 50 |
| Voltage & Frequency | 115 VAC – 50 Hz |
| Electrical Options | None |
| Pressure [Max] | 3000 psi |
| Surge Suppressor/Damper | None |
| Rated Flow [Max] | 20 gal/min |
| Indicator Lights | Yes |
| Response Type | Standard Response |
| Cycle Rate [Max] | N/A |
| Electrical Connection | Lead Wires w/ Terminal Box |
| Center Position | All Ports Blocked |
| Function | 3-Position Spring Centered |
| Port T Pressure Rating | 1000 psi |
| Electrical Options Code | LW |
| NFPA Size | D05 |
| Spool Code | 2 |
| Overrides | No Overrides |
| Port Restrictor Plugs | None |
| Spool Spring Arrangement Code | C |
| Pilot/Drain | None |
| Pilot Valve Type | N/A |
| Mechanical Options | None |
| Actuator Type | Solenoid |
| Solenoid Air Gap Code | None |
| Solenoid | Double |
| Coil Type | No Coil |
| Seal Material | Buna-N |
| Crossover | All Ports Blocked |
| Reducer Module | N/A |
| AC/DC | AC |
| Weight | 10.0 LB |
