Find a Service Center
- D05 Double Solenoid Operated Valve
- 115 VAC - 50 Hz
- Lead Wires w/Terminal Box
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Port Restrictor Plugs | None |
| Actuator Type | Solenoid |
| Pressure Port Check Valve Pressure | N/A |
| Reducer Module | N/A |
| Coil Type | No Coil |
| Center Position | All Ports Blocked |
| Surge Suppressor/Damper | None |
| Function | 3-Position Spring Centered |
| Pilot Valve Type | N/A |
| Response Type | Standard Response |
| Voltage & Frequency | 115 VAC – 50 Hz |
| Overrides | No Overrides |
| Pressure [Max] | 3000 psi |
| Operation | Solenoid Operated |
| Solenoid Air Gap Code | None |
| Coil Rating Code | None |
| Electrical Connection | Lead Wires w/ Terminal Box |
| Solenoid | Double |
| Crossover | All Ports Blocked |
| Port T Pressure Rating | 1000 psi |
| Electrical Options | None |
| Rated Flow [Max] | 20 gal/min |
| Mechanical Options Code | None |
| Design No. | 50 |
| Spool Spring Arrangement Code | C |
| NFPA Size | D05 |
| Electrical Options Code | LW |
| Flow Direction Code | 4 |
| Valve Type | Standard-Duty |
| Pilot/Drain | None |
| Cycle Rate [Max] | N/A |
| AC/DC | AC |
| Spool Code | 2 |
| Indicator Lights | Yes |
| Seal Material | Buna-N |
| Mechanical Options | None |
| Weight | 10.0 LB |
