Find a Service Center
- Flow Control Valve
- Flow Divider/Combiner Type
- FDC1-16 Series
- 12 gal/min Minimum Flow
- 47 gal/min Maximum Flow
description
- Pressure-compensated, spool-type, screw-in, flow divider/combiner cartridge. This valve is used in the dividing mode. It will take the inlet flow (port 3) and split the flow according to the ratio specified, regardless of system pressure to ports 2 and 4. In the combining mode this valve will take the inlet flows from ports 2 and 4 and combine them into port 3 according to the ratio specified.
caution
- Steel housings must be used for operating pressures above 210 bar (3,000 psi)
| Style | Spool |
| Installation | Screw-in Cartridge |
| Valve Torque into Cavity | 108 to 122 Nm |
| Type | Flow Divider/Combiner |
| Temperature Range [Min] | -40 °F |
| Series | FDC1-16 |
| Flow [Max] | 47 gal/min |
| Housing Material | Aluminum |
| Divider Flow | 24 gal/min |
| Flow [Min] | 12 gal/min |
| No. of Valve Ports | 4 |
| Manufacturer Part No. | FDC1-16-0-44 |
| Operation | Direct Acting |
| No. of Housing Ports | 4 |
| Cavity | C-16-4 |
| Seal Kit Viton | 889638 |
| Body Type | 10 |
| Seal Kit Buna | 889634 |
| Leakage | Standard |
| Model No. | FDC1-16-0-44 |
| Recommend Filtration Level | 18/16/13 microns |
| Pressure [Max] | 3000 psi |
| Seal Material | Buna-N |
| Valve Material | Cartridge only |
| Port Type | Cartridge Only |
| Temperature Range [Max] | 248 °F |
| Weight | 0.78 LB |
