Find a Service Center
- Flow Control Valve
- Flow Divider/Combiner Type
- FDC1-16 Series
- 12 gal/min Minimum Flow
- 47 gal/min Maximum Flow
description
- Pressure-compensated, spool-type, screw-in, flow divider/combiner cartridge. This valve is used in the dividing mode. It will take the inlet flow (port 3) and split the flow according to the ratio specified, regardless of system pressure to ports 2 and 4. In the combining mode this valve will take the inlet flows from ports 2 and 4 and combine them into port 3 according to the ratio specified.
caution
- Steel housings must be used for operating pressures above 210 bar (3,000 psi)
| Divider Flow | 24 gal/min |
| Recommend Filtration Level | 18/16/13 microns |
| Series | FDC1-16 |
| No. of Housing Ports | 4 |
| Style | Spool |
| Flow [Max] | 47 gal/min |
| Installation | Screw-in Cartridge |
| Temperature Range [Max] | 248 °F |
| Manufacturer Part No. | FDC1-16-0-44 |
| Flow [Min] | 12 gal/min |
| Seal Kit Viton | 889638 |
| Valve Torque into Cavity | 108 to 122 Nm |
| Pressure [Max] | 3000 psi |
| Seal Kit Buna | 889634 |
| Cavity | C-16-4 |
| Model No. | FDC1-16-0-44 |
| Body Type | 10 |
| Type | Flow Divider/Combiner |
| Operation | Direct Acting |
| Port Type | Cartridge Only |
| Temperature Range [Min] | -40 °F |
| Valve Material | Cartridge only |
| Seal Material | Buna-N |
| No. of Valve Ports | 4 |
| Leakage | Standard |
| Housing Material | Aluminum |
| Weight | 0.78 LB |
