These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Surge Suppressor/Damper
None
Pressure [Max]
5075 psi
Port T Code
6
AC/DC
AC
Port Restrictor Plug Code
None
Spool Indicator Switch Code
None
Overrides
No Overrides
Spool Spring Arrangement Code
A
Rated Flow [Max]
21 gal/min
NFPA Size
D03
Pilot/Drain
None
Solenoid Code
D
Voltage & Frequency
220/240 VAC – 50/60 Hz
Mechanical Options
None
Coil Type Code
U
Center Position
All Ports Blocked
Spool Code
2
Pilot Valve Type
N/A
Spool Shift Timing
N/A
Coil Type
DIN 43650
Function
2-Position Spring Offset, End to End
Electrical Connector Code
None
Indicator Lights
No
Housing Code
None
Surge Suppressor/Damper Code
None
Actuator Type
Solenoid
Crossover
All Ports Blocked
Design No.
60
Function Code
2
Reducer Module
N/A
Solenoid
Single
Electrical Connection
DIN 43650
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
None
EN Code
None
Valve Type
High-Performance
Response Type
Standard Response
Solenoid Energization Code
None
Seal Material
Buna-N
Coil Rating Code
D
Electrical Options
None
Manual Override Option Code
None
Port T Pressure Rating
3000 psi
Port Restrictor Plugs
None
Cycle Rate [Max]
N/A
Operation
Solenoid Operated
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
