These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pilot/Drain
None
Solenoid Indicator Lights Code
None
Solenoid Energization Code
None
Design No.
60
Rated Flow [Max]
21 gal/min
Actuator Type
Solenoid
Port Restrictor Plug Code
None
Port T Code
6
Surge Suppressor/Damper
None
Port T Pressure Rating
3000 psi
Spool Indicator Switch Code
None
Port Restrictor Plugs
None
Coil Rating Code
D
Pilot Valve Type
N/A
Response Type
Standard Response
Electrical Connector Code
None
Operation
Solenoid Operated
Solenoid Code
D
Indicator Lights
No
Reducer Module
N/A
EN Code
None
Coil Type
DIN 43650
Pressure [Max]
5075 psi
Function Code
2
Coil Type Code
U
Solenoid
Single
NFPA Size
D03
Overrides
No Overrides
Pressure Port Check Valve Pressure
N/A
Housing Code
None
Valve Type
High-Performance
Seal Material
Buna-N
Spool Code
2
Surge Suppressor/Damper Code
None
Spool Shift Timing
N/A
Spool Spring Arrangement Code
A
AC/DC
AC
Function
2-Position Spring Offset, End to End
Manual Override Option Code
None
Voltage & Frequency
220/240 VAC – 50/60 Hz
Mechanical Options
None
Electrical Options
None
Electrical Connection
DIN 43650
Center Position
All Ports Blocked
Crossover
All Ports Blocked
Cycle Rate [Max]
N/A
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
