Find a Service Center
- D05 Double Solenoid Operated Valve
- 220 VAC - 50 Hz
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Rated Flow [Max] | 20 gal/min |
| Flow Direction Code | 4 |
| Port T Pressure Rating | 1000 psi |
| Port Restrictor Plugs | None |
| Reducer Module | N/A |
| Seal Material | Buna-N |
| Mechanical Options | None |
| Response Type | Standard Response |
| Pressure Port Check Valve Pressure | N/A |
| Valve Type | Standard-Duty |
| Coil Rating Code | None |
| Solenoid | Double |
| Coil Type | No Coil |
| Indicator Lights | No |
| NFPA Size | D05 |
| Electrical Connection | Ground Terminal |
| Function | 3-Position Spring Centered |
| Voltage & Frequency | 220 VAC – 50 Hz |
| Design No. | 50 |
| Operation | Solenoid Operated |
| Surge Suppressor/Damper | None |
| Actuator Type | Solenoid |
| Mechanical Options Code | None |
| Overrides | No Overrides |
| Spool Code | 6 |
| Pilot Valve Type | N/A |
| Electrical Options | None |
| Crossover | P Blocked, A or B to T |
| Spool Spring Arrangement Code | C |
| Center Position | P Blocked, A & B to T |
| Cycle Rate [Max] | N/A |
| AC/DC | AC |
| Pilot/Drain | None |
| Electrical Options Code | None |
| Pressure [Max] | 3000 psi |
| Solenoid Air Gap Code | None |
| Weight | 10.0 LB |
