Find a Service Center
- D05 Double Solenoid Operated Valve
- 220 VAC - 50 Hz
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Overrides | No Overrides |
| Crossover | P Blocked, A or B to T |
| Coil Type | No Coil |
| Electrical Connection | Ground Terminal |
| Design No. | 50 |
| Mechanical Options | None |
| Port Restrictor Plugs | None |
| Seal Material | Buna-N |
| Cycle Rate [Max] | N/A |
| Pilot/Drain | None |
| Electrical Options | None |
| Surge Suppressor/Damper | None |
| Voltage & Frequency | 220 VAC – 50 Hz |
| Solenoid Air Gap Code | None |
| Function | 3-Position Spring Centered |
| Electrical Options Code | None |
| Flow Direction Code | 4 |
| Operation | Solenoid Operated |
| Indicator Lights | No |
| AC/DC | AC |
| NFPA Size | D05 |
| Solenoid | Double |
| Rated Flow [Max] | 20 gal/min |
| Pilot Valve Type | N/A |
| Response Type | Standard Response |
| Reducer Module | N/A |
| Actuator Type | Solenoid |
| Pressure Port Check Valve Pressure | N/A |
| Valve Type | Standard-Duty |
| Port T Pressure Rating | 1000 psi |
| Center Position | P Blocked, A & B to T |
| Spool Code | 6 |
| Pressure [Max] | 3000 psi |
| Mechanical Options Code | None |
| Coil Rating Code | None |
| Spool Spring Arrangement Code | C |
| Weight | 10.0 LB |
