Find a Service Center
- D05 Single Solenoid Operated Valve
- 48 VDC
- Ground Terminal
- No Coil
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Pilot Valve Type | N/A |
| Pressure [Max] | 3000 psi |
| Electrical Connection | Ground Terminal |
| Seal Material | Buna-N |
| Spool Code | 2 |
| Electrical Options Code | None |
| Coil Rating Code | None |
| Port Restrictor Plugs | None |
| Function | 2-Position Spring Offset |
| Pressure Port Check Valve Pressure | N/A |
| Solenoid | Single |
| Mechanical Options Code | None |
| Mechanical Options | None |
| Electrical Options | None |
| Solenoid Air Gap Code | None |
| NFPA Size | D05 |
| Center Position | All Ports Blocked |
| Spool Spring Arrangement Code | A |
| Crossover | All Ports Blocked |
| Rated Flow [Max] | 20 gal/min |
| Pilot/Drain | None |
| Indicator Lights | No |
| Design No. | 50 |
| Actuator Type | Solenoid |
| Reducer Module | N/A |
| Cycle Rate [Max] | N/A |
| Voltage & Frequency | 48 VDC |
| Surge Suppressor/Damper | None |
| Flow Direction Code | 4 |
| AC/DC | DC |
| Valve Type | Standard-Duty |
| Port T Pressure Rating | 1000 psi |
| Response Type | Standard Response |
| Operation | Solenoid Operated |
| Overrides | No Overrides |
| Coil Type | No Coil |
| Weight | 10.0 LB |
