- D05 Single Solenoid Operated Valve
- 48 VDC
- Ground Terminal
- No Coil
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Solenoid | Single |
| Pilot/Drain | None |
| Response Type | Standard Response |
| Solenoid Air Gap Code | None |
| Pressure [Max] | 3000 psi |
| Operation | Solenoid Operated |
| Surge Suppressor/Damper | None |
| Mechanical Options Code | None |
| Spool Code | 2 |
| Pilot Valve Type | N/A |
| Valve Type | Standard-Duty |
| Seal Material | Buna-N |
| Actuator Type | Solenoid |
| Port T Pressure Rating | 1000 psi |
| Port Restrictor Plugs | None |
| Rated Flow [Max] | 20 gal/min |
| Crossover | All Ports Blocked |
| Electrical Options Code | None |
| Pressure Port Check Valve Pressure | N/A |
| Cycle Rate [Max] | N/A |
| Voltage & Frequency | 48 VDC |
| AC/DC | DC |
| Electrical Options | None |
| Electrical Connection | Ground Terminal |
| NFPA Size | D05 |
| Spool Spring Arrangement Code | A |
| Design No. | 50 |
| Function | 2-Position Spring Offset |
| Indicator Lights | No |
| Coil Rating Code | None |
| Overrides | No Overrides |
| Reducer Module | N/A |
| Flow Direction Code | 4 |
| Center Position | All Ports Blocked |
| Mechanical Options | None |
| Coil Type | No Coil |
| Weight | 10.0 LB |

