Find a Service Center
- D05 Double Solenoid Operated Valve
- 230 VAC - 50 Hz
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Actuator Type | Solenoid |
| Solenoid | Double |
| Port T Pressure Rating | 1000 psi |
| Surge Suppressor/Damper | None |
| Electrical Connection | Ground Terminal |
| Coil Rating Code | None |
| Design No. | 50 |
| Voltage & Frequency | 230 VAC – 50 Hz |
| Center Position | P Blocked, A & B to T |
| Pilot/Drain | None |
| NFPA Size | D05 |
| Pilot Valve Type | N/A |
| Pressure [Max] | 3000 psi |
| Solenoid Air Gap Code | None |
| AC/DC | AC |
| Spool Code | 6 |
| Valve Type | Standard-Duty |
| Port Restrictor Plugs | None |
| Mechanical Options Code | None |
| Indicator Lights | No |
| Electrical Options Code | None |
| Spool Spring Arrangement Code | C |
| Reducer Module | N/A |
| Cycle Rate [Max] | N/A |
| Overrides | No Overrides |
| Mechanical Options | None |
| Crossover | P Blocked, A or B to T |
| Flow Direction Code | 4 |
| Operation | Solenoid Operated |
| Coil Type | No Coil |
| Seal Material | Buna-N |
| Rated Flow [Max] | 20 gal/min |
| Function | 3-Position Spring Centered |
| Electrical Options | None |
| Response Type | Standard Response |
| Pressure Port Check Valve Pressure | N/A |
| Weight | 10.0 LB |
