Find a Service Center
- D05 Double Solenoid Operated Valve
- 230 VAC - 50 Hz
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Crossover | P Blocked, A or B to T |
| AC/DC | AC |
| NFPA Size | D05 |
| Operation | Solenoid Operated |
| Electrical Options | None |
| Coil Type | No Coil |
| Response Type | Standard Response |
| Pilot/Drain | None |
| Port Restrictor Plugs | None |
| Pilot Valve Type | N/A |
| Electrical Connection | Ground Terminal |
| Mechanical Options | None |
| Solenoid Air Gap Code | None |
| Surge Suppressor/Damper | None |
| Seal Material | Buna-N |
| Rated Flow [Max] | 20 gal/min |
| Reducer Module | N/A |
| Spool Code | 6 |
| Coil Rating Code | None |
| Flow Direction Code | 4 |
| Solenoid | Double |
| Pressure Port Check Valve Pressure | N/A |
| Center Position | P Blocked, A & B to T |
| Overrides | No Overrides |
| Mechanical Options Code | None |
| Cycle Rate [Max] | N/A |
| Design No. | 50 |
| Actuator Type | Solenoid |
| Valve Type | Standard-Duty |
| Electrical Options Code | None |
| Voltage & Frequency | 230 VAC – 50 Hz |
| Port T Pressure Rating | 1000 psi |
| Pressure [Max] | 3000 psi |
| Function | 3-Position Spring Centered |
| Spool Spring Arrangement Code | C |
| Indicator Lights | No |
| Weight | 10.0 LB |
