Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| NFPA Size | D05 |
| Voltage & Frequency | 115 VAC - 60 Hz |
| Rated Flow [Max] | 20 gal/min |
| Electrical Options | None |
| Response Type | Standard Response |
| Function | 3-Position Spring Centered |
| Overrides | No Overrides |
| Solenoid Air Gap Code | None |
| Actuator Type | Solenoid |
| Cycle Rate [Max] | N/A |
| Center Position | P to T, A & B Blocked |
| Pressure Port Check Valve Pressure | N/A |
| Pilot Valve Type | N/A |
| Electrical Connection | Ground Terminal |
| Mechanical Options Code | None |
| Flow Direction Code | 4 |
| Model No. | DG4S4L-018C-50 |
| Solenoid | Double |
| Coil Rating Code | None |
| Spool Spring Arrangement Code | C |
| Valve Type | Standard-Duty |
| Port Restrictor Plugs | None |
| Port T Pressure Rating | 1000 psi |
| Spool Code | 8 |
| Reducer Module | N/A |
| Seal Material | Buna-N |
| Indicator Lights | Yes |
| Crossover | All Ports Open, Restricted |
| Operation | Solenoid Operated |
| Design No. | 50 |
| Pilot/Drain | None |
| Surge Suppressor/Damper | None |
| Mechanical Options | None |
| Pressure [Max] | 3000 psi |
| AC/DC | AC |
| Coil Type | No Coil |
| Tank Port Rating | 1000 |
| Electrical Options Code | L |
| Weight | 10.0 LB |
