Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Response Type | Standard Response |
| Spool Code | 8 |
| Operation | Solenoid Operated |
| Coil Rating Code | None |
| Electrical Connection | Ground Terminal |
| Mechanical Options Code | None |
| Port T Pressure Rating | 1000 psi |
| Electrical Options Code | L |
| Actuator Type | Solenoid |
| Solenoid Air Gap Code | None |
| Pilot Valve Type | N/A |
| Seal Material | Buna-N |
| Cycle Rate [Max] | N/A |
| Mechanical Options | None |
| Pressure Port Check Valve Pressure | N/A |
| Flow Direction Code | 4 |
| Voltage & Frequency | 115 VAC - 60 Hz |
| NFPA Size | D05 |
| Overrides | No Overrides |
| Design No. | 50 |
| Electrical Options | None |
| Port Restrictor Plugs | None |
| Function | 3-Position Spring Centered |
| Coil Type | No Coil |
| Model No. | DG4S4L-018C-50 |
| Center Position | P to T, A & B Blocked |
| Pressure [Max] | 3000 psi |
| AC/DC | AC |
| Surge Suppressor/Damper | None |
| Spool Spring Arrangement Code | C |
| Tank Port Rating | 1000 |
| Reducer Module | N/A |
| Rated Flow [Max] | 20 gal/min |
| Valve Type | Standard-Duty |
| Crossover | All Ports Open, Restricted |
| Solenoid | Double |
| Indicator Lights | Yes |
| Pilot/Drain | None |
| Weight | 10.0 LB |
