DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Coil Rating Code
B
Manual Override Option Code
None
Seal Material
Buna-N
Rated Flow [Max]
185 gal/min
Voltage & Frequency
110/120 VAC – 50/60 Hz
Design No.
10
Pilot Drain Code
None
Mechanical Options
None
AC/DC
AC
Reducer Module Code
None
Response Type
Standard Response
Center Position
All Ports Open
Actuator Type
Solenoid
Solenoid Energization Code
None
Port T Pressure Rating
5000 psi
Gauge Ports Code
None
Port Restrictor Plugs
None
Pilot/Drain
External Pilot/External Drain
Solenoid
Double
Pilot Valve Type
CETOP 3, Standard Performance
Solenoid Indicator Lights Code
L
Electrical Options
None
Crossover
All Ports Open
Spool Indicator Switch Code
None
Housing Code
W
Surge Suppressor/Damper Code
None
Overrides
Plain Override Solenoid Ends
Spool Control Modification Code
None
Spool Spring Arrangement Code
C
Pilot Pressure Code
E
Operation
Pilot Operated
Port Restrictor Plug Code
None
Electrical Connection
Five Pin Connector
Mechanical Options Code
None
Electrical Options Code
None
Pilot Valve Type Code
S
Pressure Port Check Valve Code
None
Spool Code
0
EN Code
None
NFPA Size
D08
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Surge Suppressor/Damper
None
Reducer Module
N/A
Pressure [Max]
5000 psi
Function
3-Position Spring Centered
Gauge Port
SAE-4
Electrical Connector Code
PA5
Coil Type Code
F
Response Type Code
None
Valve Type
Standard-Duty
Indicator Lights
Yes
Pressure Port Check Valve Pressure
N/A
Weight
35.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
