DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Spool Control Modification Code
None
Function
3-Position Spring Centered
Coil Type Code
F
Pressure Port Check Valve Pressure
N/A
Voltage & Frequency
110/120 VAC – 50/60 Hz
Surge Suppressor/Damper
None
Reducer Module
N/A
Response Type Code
None
Gauge Ports Code
None
Rated Flow [Max]
185 gal/min
Operation
Pilot Operated
Pressure Port Check Valve Code
None
Pilot Valve Type Code
S
Electrical Options Code
None
Pilot/Drain
External Pilot/External Drain
Center Position
All Ports Open
Port T Pressure Rating
5000 psi
Solenoid Energization Code
None
Gauge Port
SAE-4
Manual Override Option Code
None
EN Code
None
Housing Code
W
Response Type
Standard Response
Mechanical Options
None
Pilot Valve Type
CETOP 3, Standard Performance
Indicator Lights
Yes
Valve Type
Standard-Duty
Electrical Connector Code
PA5
Spool Indicator Switch Code
None
Coil Rating Code
B
NFPA Size
D08
Spool Spring Arrangement Code
C
Reducer Module Code
None
Electrical Options
None
Design No.
10
Pressure [Max]
5000 psi
Solenoid
Double
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Crossover
All Ports Open
AC/DC
AC
Overrides
Plain Override Solenoid Ends
Spool Code
0
Port Restrictor Plug Code
None
Port Restrictor Plugs
None
Solenoid Indicator Lights Code
L
Pilot Drain Code
None
Mechanical Options Code
None
Surge Suppressor/Damper Code
None
Pilot Pressure Code
E
Seal Material
Buna-N
Electrical Connection
Five Pin Connector
Actuator Type
Solenoid
Weight
35.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
