02-356271

Vickers D05 Solenoid Valve

Item #101910626

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Cycle Rate [Max]	N/A
NFPA Size	D05
Overrides	No Overrides
Mechanical Options	Single Solenoid Reverse Assembly
Tank Port Rating	1000
Solenoid	Single
Function	2-Position Spring Centered, End to Center, Single End
Indicator Lights	No
Coil Type Code	None
AC/DC	AC
Center Position	All Ports Open
Electrical Connection	KU W/ Deutsch Connector
Spool Spring Arrangement Code	B
Port Restrictor Plugs	None
Pressure Port Check Valve Pressure	N/A
Coil Type	Flying Leads
Electrical Options Code	None
Reducer Module	N/A
Flow Direction Code	4
Port T Pressure Rating	1000 psi
Response Type	Standard Response
Rated Flow [Max]	25 gal/min
Electrical Options	None
Actuator Type	Solenoid
Model No.	DG4S4-010B-B-60-LH
Coil Rating Code	B
Surge Suppressor/Damper	None
Crossover	All Ports Open
Mechanical Options Code	LH
Operation	Solenoid Operated
Voltage & Frequency	110/120 VAC - 50/60 Hz
Pressure [Max]	3600 psi
Pilot Valve Type	N/A
Design No.	60
Spool Code	0
Seal Material	Buna-N
Pilot/Drain	None
Valve Type	Standard-Duty
Weight	10.0 LB