02-356271

Vickers D05 Solenoid Valve

Item #101910626

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening

Specifications

Pilot Valve Type	N/A
Valve Type	Standard-Duty
AC/DC	AC
Port Restrictor Plugs	None
Port T Pressure Rating	1000 psi
Surge Suppressor/Damper	None
Electrical Options	None
NFPA Size	D05
Design No.	60
Coil Type Code	None
Overrides	No Overrides
Mechanical Options Code	LH
Actuator Type	Solenoid
Pressure [Max]	3600 psi
Coil Rating Code	B
Crossover	All Ports Open
Mechanical Options	Single Solenoid Reverse Assembly
Pilot/Drain	None
Response Type	Standard Response
Seal Material	Buna-N
Spool Code	0
Spool Spring Arrangement Code	B
Pressure Port Check Valve Pressure	N/A
Electrical Options Code	None
Indicator Lights	No
Model No.	DG4S4-010B-B-60-LH
Solenoid	Single
Rated Flow [Max]	25 gal/min
Tank Port Rating	1000
Flow Direction Code	4
Coil Type	Flying Leads
Function	2-Position Spring Centered, End to Center, Single End
Operation	Solenoid Operated
Center Position	All Ports Open
Cycle Rate [Max]	N/A
Electrical Connection	KU W/ Deutsch Connector
Voltage & Frequency	110/120 VAC - 50/60 Hz
Reducer Module	N/A
Weight	10.0 LB