These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Valve Type
High-Performance
Housing Code
W
Solenoid Energization Code
None
EN Code
None
Response Type
Standard Response
Coil Rating Code
B
Spool Code
2
Pressure [Max]
5075 psi
Reducer Module
N/A
Port Restrictor Plug Code
None
Electrical Connection
Five Pin Connector
Seal Material
Buna-N
Manual Override Option Code
None
Function Code
2
Spool Shift Timing
N/A
Port T Pressure Rating
150 psi
Pressure Port Check Valve Pressure
N/A
AC/DC
AC
Spool Indicator Switch Code
S5
Operation
Solenoid Operated
Crossover
All Ports Blocked
Coil Type Code
F
Surge Suppressor/Damper Code
None
Spool Spring Arrangement Code
A
Actuator Type
Solenoid
Electrical Connector Code
PA5
Overrides
No Overrides
Mechanical Options
None
Solenoid Code
B
Surge Suppressor/Damper
None
Solenoid Indicator Lights Code
L
Center Position
All Ports Blocked
Design No.
60
NFPA Size
D03
Electrical Options
None
Rated Flow [Max]
21 gal/min
Indicator Lights
Yes
Pilot/Drain
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Pilot Valve Type
N/A
Port Restrictor Plugs
None
Port T Code
2
Cycle Rate [Max]
N/A
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Solenoid
Single
Function
2-Position Spring Offset, End to End
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back