These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
EN Code
None
Coil Type Code
F
NFPA Size
D03
Mechanical Options
None
Coil Rating Code
B
Spool Code
2
Solenoid Indicator Lights Code
L
Solenoid
Single
Seal Material
Buna-N
Surge Suppressor/Damper
None
Pressure [Max]
5075 psi
Manual Override Option Code
None
Port Restrictor Plug Code
None
Operation
Solenoid Operated
Electrical Options
None
Function Code
2
Port Restrictor Plugs
None
Reducer Module
N/A
Solenoid Code
B
Port T Code
2
Valve Type
High-Performance
Electrical Connection
Five Pin Connector
Pilot Valve Type
N/A
AC/DC
AC
Spool Shift Timing
N/A
Pilot/Drain
None
Rated Flow [Max]
21 gal/min
Solenoid Energization Code
None
Function
2-Position Spring Offset, End to End
Spool Spring Arrangement Code
A
Center Position
All Ports Blocked
Design No.
60
Electrical Connector Code
PA5
Indicator Lights
Yes
Spool Indicator Switch Code
S5
Pressure Port Check Valve Pressure
N/A
Voltage & Frequency
110/120 VAC – 50/60 Hz
Housing Code
W
Surge Suppressor/Damper Code
None
Port T Pressure Rating
150 psi
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Overrides
No Overrides
Actuator Type
Solenoid
Cycle Rate [Max]
N/A
Crossover
All Ports Blocked
Response Type
Standard Response
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back