These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Valve Type
High-Performance
Cycle Rate [Max]
N/A
Design No.
60
Function
3-Position Spring Centered
Actuator Type
Solenoid
Port T Pressure Rating
3000 psi
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
EN Code
None
Rated Flow [Max]
21 gal/min
Voltage & Frequency
110/120 VAC – 50/60 Hz
Pressure [Max]
5075 psi
Overrides
No Overrides
Response Type
Standard Response
Spool Code
2
Spool Spring Arrangement Code
C
Electrical Connection
Wired Terminal Block
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Operation
Solenoid Operated
Mechanical Options
None
Electrical Options
None
Solenoid Energization Code
None
Pilot/Drain
None
AC/DC
AC
Spool Indicator Switch Code
None
Coil Type Code
F
Reducer Module
N/A
Pilot Valve Type
N/A
Indicator Lights
Yes
Surge Suppressor/Damper
None
Coil Rating Code
B
Manual Override Option Code
None
Surge Suppressor/Damper Code
None
NFPA Size
D03
Port Restrictor Plug Code
P10
Housing Code
W
Seal Material
Buna-N
Electrical Connector Code
T
Center Position
All Ports Blocked
Function Code
2
Crossover
All Ports Blocked
Port T Code
6
Solenoid
Double
Solenoid Indicator Lights Code
L
Solenoid Code
B
Port Restrictor Plugs
1 mm Diameter - P Port
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back