These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Overrides
No Overrides
Surge Suppressor/Damper
None
Pilot/Drain
None
Cycle Rate [Max]
N/A
Manual Override Option Code
None
Center Position
All Ports Blocked
Actuator Type
Solenoid
Indicator Lights
Yes
Mechanical Options
None
Electrical Connection
Wired Terminal Block
Voltage & Frequency
110/120 VAC – 50/60 Hz
Solenoid Code
B
Port Restrictor Plug Code
P10
Operation
Solenoid Operated
NFPA Size
D03
EN Code
None
Solenoid Indicator Lights Code
L
Electrical Options
None
Reducer Module
N/A
Spool Spring Arrangement Code
C
Design No.
60
Valve Type
High-Performance
Seal Material
Buna-N
Crossover
All Ports Blocked
Spool Code
2
Port Restrictor Plugs
1 mm Diameter - P Port
Port T Code
6
Rated Flow [Max]
21 gal/min
Solenoid
Double
Housing Code
W
Pressure [Max]
5075 psi
Function
3-Position Spring Centered
Response Type
Standard Response
Spool Shift Timing
N/A
Electrical Connector Code
T
Coil Rating Code
B
Pressure Port Check Valve Pressure
N/A
Coil Type Code
F
Port T Pressure Rating
3000 psi
Spool Indicator Switch Code
None
Surge Suppressor/Damper Code
None
Function Code
2
AC/DC
AC
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pilot Valve Type
N/A
Solenoid Energization Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back