These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Seal Material
Buna-N
Cycle Rate [Max]
N/A
EN Code
None
Function
3-Position Spring Centered
Port Restrictor Plugs
None
Spool Code
6
Solenoid
Double
Electrical Options
None
Crossover
P Blocked, A or B to T
Surge Suppressor/Damper Code
None
Coil Rating Code
BL
Pressure Port Check Valve Pressure
N/A
Pilot/Drain
None
Spool Shift Timing
N/A
Voltage & Frequency
110/120 VAC – 50/60 Hz, Low Power Coil
Housing Code
None
Mechanical Options
None
Operation
Solenoid Operated
Port T Pressure Rating
3000 psi
Design No.
60
Solenoid Energization Code
V
Port T Code
6
Rated Flow [Max]
21 gal/min
Response Type
Standard Response
Actuator Type
Solenoid
Function Code
6
Valve Type
High-Performance
Pressure [Max]
5075 psi
Center Position
P Blocked, A & B to T
Spool Indicator Switch Code
None
Pilot Valve Type
N/A
Solenoid Indicator Lights Code
None
AC/DC
AC
Overrides
No Overrides
Electrical Connection
DIN 43650
Manual Override Option Code
H
Surge Suppressor/Damper
None
Spool Spring Arrangement Code
C
Port Restrictor Plug Code
None
NFPA Size
D03
Indicator Lights
No
Reducer Module
N/A
Coil Type Code
U
Solenoid Code
BL
Coil Type
DIN 43650
Electrical Connector Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
