These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
P Blocked, A & B to T
Coil Type
DIN 43650
Pilot Valve Type
N/A
Spool Indicator Switch Code
None
Seal Material
Buna-N
Electrical Options
None
Spool Shift Timing
N/A
Port T Pressure Rating
3000 psi
Solenoid Code
BL
Port Restrictor Plug Code
None
Electrical Connection
DIN 43650
Response Type
Standard Response
Solenoid
Double
Pressure [Max]
5075 psi
Solenoid Indicator Lights Code
None
Spool Spring Arrangement Code
C
Port T Code
6
Solenoid Energization Code
V
Reducer Module
N/A
Crossover
P Blocked, A or B to T
Cycle Rate [Max]
N/A
Design No.
60
Function Code
6
AC/DC
AC
Operation
Solenoid Operated
Indicator Lights
No
Pressure Port Check Valve Pressure
N/A
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Port Restrictor Plugs
None
Spool Code
6
Housing Code
None
Mechanical Options
None
Rated Flow [Max]
21 gal/min
EN Code
None
Coil Rating Code
BL
Voltage & Frequency
110/120 VAC – 50/60 Hz, Low Power Coil
Overrides
No Overrides
NFPA Size
D03
Actuator Type
Solenoid
Manual Override Option Code
H
Valve Type
High-Performance
Function
3-Position Spring Centered
Surge Suppressor/Damper
None
Coil Type Code
U
Electrical Connector Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
