These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
AC/DC
DC
Spool Code
6
Operation
Solenoid Operated
Coil Rating Code
G
Port T Code
7
Rated Flow [Max]
21 gal/min
Solenoid Indicator Lights Code
None
Electrical Connector Code
None
Seal Material
Buna-N
Coil Type Code
F
Port Restrictor Plugs
None
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plug Code
None
Electrical Options
None
Valve Type
High-Performance
Overrides
No Overrides
Surge Suppressor/Damper Code
None
Pilot Valve Type
N/A
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
NFPA Size
D03
Center Position
P Blocked, A & B to T
Indicator Lights
No
Design No.
60
Spool Spring Arrangement Code
N
Solenoid
Double
Solenoid Code
G
Solenoid Energization Code
None
Spool Indicator Switch Code
None
Pressure [Max]
5075 psi
Actuator Type
Solenoid
Voltage & Frequency
12 VDC
Cycle Rate [Max]
N/A
Pilot/Drain
None
Electrical Connection
No Connector
Function
3-Position Detented
Surge Suppressor/Damper
None
Spool Shift Timing
N/A
Manual Override Option Code
H
EN Code
None
Response Type
Standard Response
Crossover
P Blocked, A or B to T
Function Code
6
Mechanical Options
None
Port T Pressure Rating
3000 psi
Housing Code
W
Reducer Module
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
