These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Housing Code
W
Spool Code
6
Electrical Connection
No Connector
Port T Pressure Rating
3000 psi
Solenoid Indicator Lights Code
None
Seal Material
Buna-N
Function Code
6
Surge Suppressor/Damper
None
NFPA Size
D03
Pressure [Max]
5075 psi
Spool Shift Timing
N/A
Port Restrictor Plugs
None
Response Type
Standard Response
Port Restrictor Plug Code
None
Valve Type
High-Performance
Operation
Solenoid Operated
Center Position
P Blocked, A & B to T
Pressure Port Check Valve Pressure
N/A
Design No.
60
Actuator Type
Solenoid
EN Code
None
Pilot/Drain
None
Overrides
No Overrides
Cycle Rate [Max]
N/A
Manual Override Option Code
H
Port T Code
7
Surge Suppressor/Damper Code
None
Solenoid
Double
Function
3-Position Detented
Electrical Connector Code
None
AC/DC
DC
Solenoid Energization Code
None
Pilot Valve Type
N/A
Rated Flow [Max]
21 gal/min
Electrical Options
None
Reducer Module
N/A
Spool Spring Arrangement Code
N
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Voltage & Frequency
12 VDC
Coil Type Code
F
Solenoid Code
G
Coil Rating Code
G
Spool Indicator Switch Code
None
Mechanical Options
None
Crossover
P Blocked, A or B to T
Indicator Lights
No
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
