These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Code
66
Crossover
P Blocked, A or B to T
Spool Shift Timing
N/A
Solenoid Code
H
Solenoid
Double
Rated Flow [Max]
21 gal/min
AC/DC
DC
Port T Code
7
Reducer Module
N/A
Port T Pressure Rating
3000 psi
Spool Spring Arrangement Code
C
Pilot/Drain
None
Seal Material
Buna-N
Solenoid Indicator Lights Code
None
Solenoid Energization Code
None
Indicator Lights
No
Function Code
66
Pressure Port Check Valve Pressure
N/A
Cycle Rate [Max]
N/A
Coil Type
DIN 43650
Electrical Connector Code
None
Surge Suppressor/Damper Code
None
Electrical Options
None
Coil Type Code
U
Overrides
No Overrides
Function
3-Position Spring Centered
Spool Indicator Switch Code
None
EN Code
None
Operation
Solenoid Operated
Center Position
P Blocked, A & B to T
Valve Type
High-Performance
Housing Code
None
Port Restrictor Plugs
None
NFPA Size
D03
Voltage & Frequency
24 VDC
Pilot Valve Type
N/A
Manual Override Option Code
None
Design No.
60
Pressure [Max]
5075 psi
Port Restrictor Plug Code
None
Surge Suppressor/Damper
None
Coil Rating Code
H
Actuator Type
Solenoid
Mechanical Options
None
Electrical Connection
DIN 43650
Response Type
Standard Response
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
