These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Valve Type
High-Performance
Cycle Rate [Max]
N/A
Coil Type
DIN 43650
Coil Type Code
U
Solenoid
Double
Solenoid Indicator Lights Code
None
Port T Pressure Rating
3000 psi
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plug Code
None
Seal Material
Buna-N
Port Restrictor Plugs
None
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
C
Function Code
66
AC/DC
DC
NFPA Size
D03
Pilot/Drain
None
Spool Shift Timing
N/A
Crossover
P Blocked, A or B to T
Overrides
No Overrides
Reducer Module
N/A
Design No.
60
Surge Suppressor/Damper Code
None
Solenoid Code
H
Electrical Connection
DIN 43650
Indicator Lights
No
Actuator Type
Solenoid
Electrical Options
None
Response Type
Standard Response
Mechanical Options
None
Coil Rating Code
H
Rated Flow [Max]
21 gal/min
Housing Code
None
Function
3-Position Spring Centered
Center Position
P Blocked, A & B to T
Surge Suppressor/Damper
None
Solenoid Energization Code
None
Manual Override Option Code
None
Port T Code
7
Spool Code
66
EN Code
None
Pilot Valve Type
N/A
Voltage & Frequency
24 VDC
Operation
Solenoid Operated
Electrical Connector Code
None
Pressure [Max]
5075 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
