Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Center Position | All Ports Blocked |
| Pressure [Max] | 3600 psi |
| Actuator Type | Solenoid |
| Overrides | No Overrides |
| Crossover | All Ports Blocked |
| Port T Pressure Rating | 1000 psi |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Coil Rating Code | C |
| Solenoid | Single |
| Pressure Port Check Valve Pressure | N/A |
| Model No. | DG4S4-012A-U-C-60 |
| Reducer Module | N/A |
| Function | 2-Position Spring Offset |
| Mechanical Options | None |
| Design No. | 60 |
| AC/DC | AC |
| Seal Material | Buna-N |
| Response Type | Standard Response |
| Electrical Connection | DIN 43650 |
| Valve Type | Standard-Duty |
| Indicator Lights | No |
| Rated Flow [Max] | 25 gal/min |
| Electrical Options Code | None |
| Mechanical Options Code | None |
| Operation | Solenoid Operated |
| Surge Suppressor/Damper | None |
| Flow Direction Code | 4 |
| Spool Code | 2 |
| Pilot Valve Type | N/A |
| Pilot/Drain | None |
| Electrical Options | None |
| Coil Type Code | U |
| NFPA Size | D05 |
| Coil Type | ISO 4400 (Din 43650) Connector |
| Port Restrictor Plugs | None |
| Tank Port Rating | 1000 |
| Cycle Rate [Max] | N/A |
| Spool Spring Arrangement Code | A |
| Weight | 10.0 LB |
