Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Offset Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Flow Direction Code | 4 |
| Valve Type | Standard-Duty |
| Port Restrictor Plugs | None |
| Reducer Module | N/A |
| Actuator Type | Solenoid |
| Response Type | Standard Response |
| AC/DC | AC |
| Overrides | No Overrides |
| Electrical Options | None |
| Spool Spring Arrangement Code | A |
| Port T Pressure Rating | 1000 psi |
| Electrical Options Code | None |
| Model No. | DG4S4-012A-U-C-60 |
| NFPA Size | D05 |
| Spool Code | 2 |
| Crossover | All Ports Blocked |
| Coil Rating Code | C |
| Voltage & Frequency | 110/120 VAC - 50/60 Hz |
| Surge Suppressor/Damper | None |
| Tank Port Rating | 1000 |
| Electrical Connection | DIN 43650 |
| Pilot Valve Type | N/A |
| Mechanical Options | None |
| Rated Flow [Max] | 25 gal/min |
| Cycle Rate [Max] | N/A |
| Function | 2-Position Spring Offset |
| Coil Type | ISO 4400 (Din 43650) Connector |
| Center Position | All Ports Blocked |
| Seal Material | Buna-N |
| Pilot/Drain | None |
| Indicator Lights | No |
| Pressure Port Check Valve Pressure | N/A |
| Mechanical Options Code | None |
| Coil Type Code | U |
| Design No. | 60 |
| Operation | Solenoid Operated |
| Pressure [Max] | 3600 psi |
| Solenoid | Single |
| Weight | 10.0 LB |
