These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Voltage & Frequency
24 VDC
Pilot Valve Type
N/A
Manual Override Option Code
None
Surge Suppressor/Damper Code
None
Reducer Module
N/A
Solenoid
Double
Coil Type Code
U
Port Restrictor Plug Code
None
Mechanical Options
None
Pressure [Max]
5075 psi
EN Code
EN21
Overrides
No Overrides
Crossover
P Blocked, A or B to T
Surge Suppressor/Damper
None
Solenoid Code
H
Spool Indicator Switch Code
None
Actuator Type
Solenoid
Pressure Port Check Valve Pressure
N/A
Rated Flow [Max]
21 gal/min
Coil Rating Code
H
Electrical Connector Code
None
Solenoid Energization Code
None
Pilot/Drain
None
Seal Material
Buna-N
Valve Type
High-Performance
Port T Pressure Rating
3000 psi
Function Code
6
Electrical Options
None
Solenoid Indicator Lights Code
None
NFPA Size
D03
Function
3-Position Detented
Port T Code
7
AC/DC
DC
Cycle Rate [Max]
N/A
Spool Spring Arrangement Code
N
Coil Type
DIN 43650
Operation
Solenoid Operated
Indicator Lights
No
Port Restrictor Plugs
None
Housing Code
None
Spool Code
6
Design No.
60
Center Position
P Blocked, A & B to T
Response Type
Standard Response
Electrical Connection
DIN 43650
Spool Shift Timing
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
