These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid Indicator Lights Code
None
Reducer Module
N/A
Function Code
6
Coil Type Code
U
AC/DC
DC
Actuator Type
Solenoid
Pressure [Max]
5075 psi
Spool Indicator Switch Code
None
Rated Flow [Max]
21 gal/min
Spool Shift Timing
N/A
Voltage & Frequency
24 VDC
Mechanical Options
None
Coil Type
DIN 43650
Crossover
P Blocked, A or B to T
Overrides
No Overrides
Housing Code
None
Electrical Options
None
Function
3-Position Detented
Pressure Port Check Valve Pressure
N/A
Cycle Rate [Max]
N/A
Indicator Lights
No
Port Restrictor Plug Code
None
Spool Spring Arrangement Code
N
Solenoid Energization Code
None
Port T Code
7
Coil Rating Code
H
Solenoid
Double
Manual Override Option Code
None
Center Position
P Blocked, A & B to T
Design No.
60
Solenoid Code
H
Seal Material
Buna-N
Surge Suppressor/Damper Code
None
NFPA Size
D03
Pilot Valve Type
N/A
Electrical Connection
DIN 43650
Spool Code
6
Pilot/Drain
None
Port T Pressure Rating
3000 psi
Electrical Connector Code
None
Valve Type
High-Performance
Response Type
Standard Response
Operation
Solenoid Operated
Port Restrictor Plugs
None
Surge Suppressor/Damper
None
EN Code
EN21
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
