These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Operation
Solenoid Operated
Electrical Options
None
Electrical Connector Code
None
Port Restrictor Plugs
None
Function
3-Position Spring Centered
Crossover
All Ports Blocked
Response Type
Standard Response
Valve Type
High-Performance
Center Position
All Ports Blocked
Actuator Type
Solenoid
Spool Shift Timing
N/A
NFPA Size
D03
Spool Spring Arrangement Code
C
Overrides
No Overrides
Solenoid Indicator Lights Code
L
Manual Override Option Code
H
EN Code
EN21
AC/DC
DC
Port Restrictor Plug Code
None
Reducer Module
N/A
Solenoid Code
GL
Pilot Valve Type
N/A
Cycle Rate [Max]
N/A
Voltage & Frequency
12 VDC, Low Power Coil
Coil Type Code
F
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Solenoid Energization Code
None
Electrical Connection
No Connector
Mechanical Options
None
Port T Pressure Rating
3000 psi
Seal Material
Buna-N
Pilot/Drain
None
Port T Code
7
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Spool Indicator Switch Code
None
Surge Suppressor/Damper Code
None
Indicator Lights
Yes
Spool Code
2
Design No.
60
Coil Rating Code
GL
Solenoid
Double
Function Code
2
Housing Code
W
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
